Auxiliary handle
- Always use your power tool with the auxiliary handle (15) fitted.
- Make sure that the auxiliary handle is always tightened. Otherwise you could lose control of the power tool when working.
Repositioning the auxiliary handle (see figure A)
You can swivel the auxiliary handle (15) as required to achieve a safe, ergonomic working posture.
- Turn the lower section of the auxiliary handle (15) anti-clockwise and then swivel the auxiliary handle (15) to the desired position. Then tighten the lower section of the auxiliary handle (15) clockwise.
Ensure that the tightening strap of the auxiliary handle is resting in the designated groove on the housing.